PYLONTECH 100AH LITHIUM BATTERY
Features
- 100A max cont dishcagre (200A Peak for 10 Seconds)
- Over 4000+ cycles to 80% DoD for superior service life
- Scalable up to 8 units in parallel (10.24kwh)
- On board state of charge indicator for quick capacity checks
- IEC62619 and UN38.3 trnasport Certified
- in-built Heater film for use in sub-zero conditions
- ON/OFF button to isolate when not in use
- lightweight only 12KG
Specifications:
| Voltage (V) | 12.8V |
|---|---|
| Capacity (Ah) | 100Ah |
| Watt Hour (Wh) | 1280Wh |
| Chemistry | LiFePO4 (Lithium Iron Phosphate) |
| Cycle Life | >4000 cycles (80% DoD @ 25°C) |
| Max. continuous discharge current | 100A |
| Max. PEAK discharge current | 200A (10 seconds) |
| Discharge cut-off voltage | 10V |
| Charge Voltage | 14.0V - 14.4V |
| Max. continuous charge current | 100A |
| Operating discharge temperature | -20°C to +50°C |
| Operating charge temperature | -20°C to +50°C (charger engages heater film until battery reaches 0°C and then begins charging) |
| Storage temperature | -20°C to +60°C |
| State of Charge display | Yes |
| Short circuit protection | Yes |
| Ingress Rating | IP20 rating |
| Series connection allowed* | NO |
| Parallel connection allowed* | Up to 8P* (max. continuous discharge current of 0.5C when in parallel) |
| Case structure | Rugged mechanical design |
| Certifications | IEC62619, UN38.3 approved |
| Warranty | 3 years |
* No Series Connection Allowed.