MultiPlus-II 24/3000/70-32 230V

PMP242305010
$1,545.00
In stock
+
Compare

Description

The MultiPlus-II 24/3000/70-32 230V VE.Bus combines the functions of the MultiPlus and the MultiGrid.
It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A). 
It also has all the features of the MultiGrid with built-in anti-islanding and an increasingly long list of country approvals.

PowerAssist

The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

ESS: Energy Storage Systems

The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual.

Uninterrupted AC power (UPS function)

In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Remote Monitoring and Control

When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backup generator and more"

Parameters

Values

Model 24/3000/70-32
PowerControl & PowerAssist  Yes
Transfer switch  32 A 
Maximum AC input current  32 A 
DC Input voltage range  19 - 33 V
Output  Output voltage: 230 VAC ± 2% ,Frequency: 50 Hz ± 0,1%
Cont. output power at 25°C  3000 VA 
Cont. output power at 25°C  2400 W 
Cont. output power at 40°C  2200 W 
Cont. output power at 65°C  1700 W 
Maximum apparent feed-in power  3000 VA 
Peak power  5500 W 
Maximum efficiency  94%
Zero load power  13 W
Zero load power in AES mode  9 W
Zero load power in Search mode  3 W
AC Input  Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz 
Charge voltage 'absorption'   28.8 V
Charge voltage 'float'  27.6 V
Storage mode   26.4 V
Maximum battery charge current 70 A
Battery temperature sensor  Yes
Auxiliary output  Yes (32A) 
External AC current sensor (optional)  50A or 100A 
Programmable relay  Yes
Protection a - g
VE.Bus communication port   For parallel (not for 8k and 10k models) and three phase operation, remote monitoring and system integration 
General purpose com. port  Yes, 2x 
Remote on-off  Yes
Operating temperature range  -40 to +65°C (fan assisted cooling) 
Humidity (non-condensing)  max95%
Material & Colour  Steel, blue RAL 5012 
Protection category  IP22
Battery-connection  M8 bolts 
230 V AC-connection  Screw terminals 13 mm² (6 AWG) 
Weight  19 kg 
Dimensions 499 x 268 x 141 
Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 

Datasheet - Victron MultiPlus-II 24/3000/70-32 230V VE.Bus (Datasheet-MultiPlus-II-inverter-charger-EN.pdf, 597 Kb) [Download]

Manual - Victron MultiPlus-II 24/3000/70-32 230V VE.Bus (Manual-MultiPlus-II-12V-24V-48V-3k,-5k,-8k,-10k-230V-EN-NL-FR-DE-FI-SV.pdf, 3,019 Kb) [Download]

Products
Family Owned for 40 Years

Toowoomba's favourite Battery and Electronics retailer since 1982

After Sale Support

Our knowledgeable staff are happy to take any enquiries about your purchase