MultiPlus-II 24/3000/70-32 230V GX

PMP242306000
$1,593.00
Out of stock

Description

An Inverter/Charger with device networking built-in, the MultiPlus-II 24/3000/70-32  230V GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features - such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power - can all be controlled straight from your phone or smart device. Remote monitoring is also possible.

PowerAssist

The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

ESS: Energy Storage Systems

The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters. For examples and more detailed information see the ESS (Energy Storage System) manual.

Uninterrupted AC power (UPS function)

In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

Remote Monitoring and Control

When coupled with a GX device (e.g. Cerbo GX) you can monitor and control your Multi and system or systems' locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, from adjusting your Multi to auto starting a backup generator and more"

Parameters

Values

Model 24/3000/70-32
PowerControl & PowerAssist Yes
Transfer switch 32 A
Maximum AC input current 32 A
Auxiliary output Yes (32 A)
DC Input voltage range 19 – 33 V
Output Output voltage: 230 VAC ± 2 % Frequency: 50 Hz ± 0,1 %
Cont. output power at 25 °C 3000 VA
Cont. output power at 25 °C 2400 W
Cont. output power at 40 °C 2200 W
Cont. output power at 65 °C 1700 W
Maximum apparent feed-in power 3000 VA
Peak power 5500 W
Maximum efficiency 94%
Zero load power 13 W
Zero load power in AES mode 9 W
Zero load power in Search mode 3 W
AC Input Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz
Charge voltage 'absorption' 28,8 V
Charge voltage 'float' 27,6 V
Storage mode 26,4 V
Maximum battery charge current 70 A
Battery temperature sensor Yes
Interfaces BMS-Can, USB, Ethernet, VE.Direct, Wi-Fi
External AC current sensor (optional) 50 A
Programmable relay Yes
Protection a-g
VE.Bus communication port  For parallel and three phase operation, remote monitoring and system integration 
General purpose com. port Yes, 2x
Remote on-off Yes
Operating temperature range -40 to +65 °C (fan assisted cooling)
Humidity (non-condensing) max 95 %
Material & Colour Steel, blue RAL 5012
Protection category IP22
Battery-connection M8 bolts
230 V AC-connection Screw terminals 13 mm² (6 AWG)
Weight 19 kg
Dimensions (hxwxd) mm 506 x 275 x 147
Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2

Datasheet - Victron MultiPlus-II 24/3000/70-32 230V GX (Datasheet-MultiPlus-II-GX-inverter-charger-EN.pdf, 617 Kb) [Download]

Manual - Victron MultiPlus-II 24/3000/70-32 230V GX (MultiPlus-II_GX-en.pdf, 3,197 Kb) [Download]

Products
Family Owned for 40 Years

Toowoomba's favourite Battery and Electronics retailer since 1982

After Sale Support

Our knowledgeable staff are happy to take any enquiries about your purchase